EPON PTD12G 48 EPON OLT | ||
Technical Specifications | ||
Chassis | Rack Mountable | Distributed design: Flexible & Extendable 4U |
Chipset | Cortina | |
EPON Port | QTY | 48 |
Physical Interface | SFP Slots | |
Connector Module Type | 1000BASE-PX20+ | |
Uplink Port | QTY | 8 |
SFP | 4*10GE SFP+ & 4*GE SFP | |
Ethernet | 4*GE RJ45 combo | |
Max splitting ratio | 1:64 | |
PON Port Specification | ||
Transmission Distance | 20KM | |
EPON port speed | Symmetrical 1.25Gbps | |
Wavelength | TX 1490nm, RX 1310nm | |
Connector | SC/PC | |
Fiber Type | 9/125μm SMF | |
TX Power | 0~+5dBm | |
Rx Sensitivity | -27dBm | |
Saturation Optical Power | -6dBm | |
Management Mode | SNMP and CLI | |
Max ONU | 3072 | |
Management Function | Fan Group Detecting; Online ONU configuration and management; | |
Layer2 Switch | Fully support of QoS Support VLAN Translation Support VLAN QinQ Support VLAN tagging, Trunk; Support Link aggregation Support RSTP, IGMP | |
Layer 3 Route | ARP, ARP proxy DHCP relay, DHCP proxy Static routing Dynamic routing: RIP, OSPF, BGP | |
EPON Function | Support port-based rate limitation and bandwidth control; Up to 20KM transmission distance; Support data encryption, multi-cast, port VLAN; Support ONU authorize mode: Whitelist, Blacklist and automatic authentication; Support Dynamic Bandwidth Allocation (DBA); Support VLAN Pool; Support Loop Detection Support power-off alarm function, easy for link problem detection; Support ACL Support ONU distance calculation on NMS; | |
Power Supply | 220V/48V | |
Power Consumption | < 360W | |
Operating Environment | Operating Temperature | -10~+55℃ |
Storage Temperature | -40~+85℃ | |
Relative Humidity | 5~90%(non-conditioning) |