EPON PTFD8C 8EPON Outdoor OLT | ||
Technical Specifications | ||
Chassis | Pole Mountable, Wall mountable | |
Chipset | Cortina | |
EPON Port | QTY | 8 |
Physical Interface | SFP Slots | |
Connector Module Type | 1000BASE-PX20+ | |
Uplink Port | QTY | 8 |
SFP | 2x10GE SFP+ & 2xGE SFP | |
Ethernet | 4xGE RJ45 | |
Max splitting ratio | 1:64 | |
EDFA/EYDFA | EDFA Out: 23dBm & EYDFA Out: 28dBm | |
Wavelength: 1550nm | ||
PON Port Specification | ||
Transmission Distance | 20KM | |
EPON port speed | Symmetrical 1.25Gbps | |
Wavelength | TX 1490nm, RX 1310nm | |
Connector | SC/PC | |
Fiber Type | 9/125μm SMF | |
TX Power | 0~+5dBm | |
Rx Sensitivity | -27dBm | |
Saturation Optical Power | -6dBm | |
Management Mode | SNMP, Web and CLI | |
Max ONU | 512 | |
Management Function | Port Status monitoring and configuration management; | |
Layer2 Switch | Fully support of QoS Support VLAN Translation Support VLAN QinQ Support VLAN tagging, Trunk Support Link aggregation Support RSTP, IGMP | |
Layer 3 Route | ARP, ARP proxy DHCP relay, DHCP proxy Static routing Dynamic routing: RIP, OSPF, BGP | |
EPON Function | Support port-based rate limitation and bandwidth control; Up to 20KM transmission distance; Support data encryption, multi-cast, port VLAN; Support ONU authorize mode: Whitelist, Blacklist and automatic authentication; Support Dynamic Bandwidth Allocation (DBA); Support VLAN Pool; Support Loop Detection Support power-off alarm function, easy for link problem detection; Support ACL Support ONU distance calculation on NMS; | |
Power Supply | 150V – 265V AC; 60V -48V AC optional Cable power supply | |
UPS Optional | ||
Power Consumption | <45W, with EDFA <65W | |
Operating Environment | Operating Temperature | -40℃ to +85℃ |
Relative Humidity | 5~90%(non-conditioning) |